毛片在线视频免费观看,一级毛片视频免费观看,狂野欧美激情性xxxx喷水,黄色一级片免费网站,看一级毛片视频,一级免费观看视频,中国一级毛片在线视频

Maintaining and repairing hot melt adhesive equipment is a crucial step in ensuring its long-term stable operation and extending its service life. Here are some key maintenance and repair recommendations:

Before maintenance and repair, cut off the power supply of the hot melt adhesive equipment to prevent electric shock incidents. When cleaning the hot melt glue cylinder, it is necessary to prevent the use of flames or sharp objects to prevent scratching the inner surface coating of the glue cylinder. When repairing areas with electric heating, gloves, goggles, and long sleeved clothing should be worn to prevent injury.

Secondly, regarding the daily maintenance of the hot melt adhesive machine, including regular cleaning and smoothness. When cleaning regularly, the machine power should be turned off, and the surface and internal components of the machine should be wiped with a clean cloth to ensure cleanliness. The dust and debris at the ventilation holes of the machine should also be cleaned to ensure smooth ventilation. At the same time, the drum bearings and chains of the machine should be regularly coated with an appropriate amount of smooth oil to ensure the smooth operation of the machine.

In addition, attention should also be paid to the details during use. Prevent overload work, follow appropriate work standards, and do not exceed the machine's load capacity. At the same time, ensure that the hot melt adhesive equipment is used in a dry and well ventilated place to prevent direct sunlight, high temperature, humidity and other environmental conditions.

Regarding specific repair activities, they can be organized according to the operating time of the heater. For example, clean the outer surfaces of the glue machine and gun every 8 hours, and check the O-rings and gaskets in the throat joints and plugs. Clean the differential seat screening program every 40 hours and organize the detachable nozzles. Check whether the power connection and terminal connection are tight every 160 hours, and organize the interior of the power cabinet.

At the same time, it is ensured that only trained and qualified personnel can carry out repair and maintenance work on hot melt adhesive equipment, to prevent improper operation from causing machine malfunctions or incidents.

Article source: Jiangmen Hot Melt Adhesive Equipment Manufacturer www.0418-2116789.com